cool hit counter

Pre Trip Inspection Class B Passenger Bus Checklist Ideas

Pre Trip Inspection Class B Passenger Bus Checklist. 1) 4/32 minimum tread depth in the major grooves. 2) no recapped, retreaded or regrooved tires allowed on the front of the bus.

pre trip inspection class b passenger bus checklist
Source : www.pinterest.com

3) no cuts or damage to the sidewall or tire tread. 5 under bus leaks (oil, fuel, coolant, water, power steering filled, brake fluid, etc.

CDL Training San Antonio Is A Truck Driving School With

6 general outside appearance b check under the hood 1. A bus driver must have a passenger endorsement on his/her cdl.

Pre Trip Inspection Class B Passenger Bus Checklist

< strong>At minimum, the inspection must include the brakes, steering, lights and reflectors, tires, horn, windshield wipers, mirrors, coupling devices, wheels and rims, emergency equipment and load security.Battery/ belts/ hoses/ wiring 2.Before opening the hood, check for leaks under the engine.Bus maintenance & safety inspection.

Check for leaks, condition of hoses.Clearance lights proper color, securely mounted, not cracked or dirty, no moisture inside lense.Do the same check on the passenger side.Dot tape is securely mounted, not dirty, covers at least 50% of the side.

Driver seat, passenger seats, padding, interior, and floor condition.Each of the 20 questions is based on the official 2021 cdl manual.For children who are going to be sitting down in the classroom for most of the day, this helps them to do more physical activities.Frame is not bbc, securely mounted.

Gently pull against the brake by releasing the clutch, and it should hold the vehicle.Header board not bbc, all hardware present.Here are some benefits of using a school bus:1.Identify all defects or you may not receive credit.

It helps bus drivers or bus fleet supervisors to catch mechanical issues, defects, and damages.It keeps kids more active.I’ve been working on this for a long time and.John checks underneath and around the bus for cracks or imperfections.

John enters the bus to begin the first phase of the pre trip inspection.John sets chocks to make sure bus is secure during inspection.Left side rear right side front 1.Look for dripping fluids on the underside of the engine and transmission.

Look for puddles on the ground that would indicate a leak.Make sure your air pressure does not lose many more than 2 psi in one minute.No fl uid leaks beneath the van are visible van sits level with no sign of uneven loading all exterior lights/signal turns operate correctly windshield, windows, and exterior mirrors are all.Not bbc, no holes, all rivets in place.

Rear of the truck doors:So you need to have it down.Taking the bus to school involves walking to the bus stop.Tell the tester how you know that the part you are 1 inspecting is in good, safe working condition.

The air pressure should be stable.The content of this video relates to basic safety rules around school buses.The following steps would be applicable to the inspection of a school bus, starting at the engine compartment and following a clockwise direction around the vehicle.The school bus instructor for this video is john vezaldenos, a california certified state instructor.

There are several answer options, but only one of them is.This template has been built to perform the following:To obtain the endorsement, you must pass a knowledge test on sections 2 and 4 of this manual (if the bus has air brakes, you also must pass a knowledge test on section 5).Valve caps and stems are not missing, broken or damaged.

With the engine running, apply the foot brake and hold for five seconds.You also must pass the skills tests required for the class of vehicle you drive.You must name and point to or touch each item, and fully explain what you are inspecting (you must ensure the.• mounted properly • not missing, ripped or torn dot bumper:

• not bent or damaged lights & reflectors:• not bent, broken, or damaged • close and latch securely • hinges secure, no damage splash guards: